All outputs are example outputs, generated on my own local network (mapping a raspberry pi with Raspbian; Linux pi 3.18.0-trunk-rpi #1 PREEMPT Debian 3.18.5-1~exp1+rpi19 (2015-08-08) armv6l GNU/Linux). See exercise3a.

# nmap 192.168.84.10        # (for example); basic 1000 TCP ports scan

Starting Nmap 6.47 ( http://nmap.org ) at 2015-09-24 22:36 CEST
Nmap scan report for 192.168.84.75
Host is up (0.0000040s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
80/tcp  open  http
111/tcp open  rpcbind
443/tcp open  https
# nmap -sS 192.168.84.10    # TCP SYN scan; only check handshake (doesn't need that many connections)

Starting Nmap 6.47 ( http://nmap.org ) at 2015-09-24 22:44 CEST
Nmap scan report for 192.168.84.75
Host is up (0.000054s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
80/tcp  open  http
111/tcp open  rpcbind
443/tcp open  https

Nmap done: 1 IP address (1 host up) scanned in 89.55 seconds
# nmap -sT 192.168.84.10    # TCP connect scan; if TCP SYN doesn't work

Starting Nmap 6.47 ( http://nmap.org ) at 2015-09-24 22:46 CEST
Nmap scan report for 192.168.84.75
Host is up (0.00016s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
80/tcp  open  http
111/tcp open  rpcbind
443/tcp open  https

Nmap done: 1 IP address (1 host up) scanned in 0.05 seconds
# nmap -sU 192.168.84.10    # UDP

Starting Nmap 6.47 ( http://nmap.org ) at 2015-09-24 22:46 CEST
Nmap scan report for 192.168.84.75
Host is up (0.000054s latency).
Not shown: 995 closed ports
PORT     STATE         SERVICE
68/udp   open|filtered dhcpc
111/udp  open          rpcbind
631/udp  open|filtered ipp
1900/udp open|filtered upnp
5353/udp open|filtered zeroconf

Nmap done: 1 IP address (1 host up) scanned in 187.41 seconds


I would use others from the manual if these fail.