aboutsummaryrefslogtreecommitdiff
path: root/src/print_battery_info.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-21Added status_unk to battery_infoeoin1-2/+6
2016-01-25This removes the 'remaining' time when the battery is full, since the ↵Clayton Craft1-1/+1
remaining time is always 00:00:00. When the battery is discharging, the remaining time will show up again if the user has set their format correctly.
2015-10-08Properly detect the battery charging status under FreeBSD.John Baldwin1-2/+3
The hw.acpi.battery.state sysctl returns a bitmask of flags as defined in <dev/acpica/acpiio.h>. Use constants from this header to examine the state and check for the charging flag to determine if the battery is charging.
2015-10-04Added support for lemonbarBrendan Van Hook1-9/+9
2015-05-20Clamp the percentage at 100% when last_full_capacity is enabled.Michael Stapelberg1-0/+8
2015-05-05Changed battery info output to HH:MM for consistency accross all platformsNicholas Helke1-2/+2
2015-03-16clang-format-3.5 -i **/*.[ch], update modelineMichael Stapelberg1-540/+524
From here on, we’ll use clang-format to automatically format the source. This has worked well in i3, so we are introducing it for i3status.
2014-12-22Avoid use of uninitialized variable in print_battery_infoAlexander Monakov1-1/+1
The boolean flag 'watt_as_unit' may be used without being initialized if the configured battery path does not contain expected statistics (for example if it is misconfigured and points to AC adapter info or simply an unrelated file). Even though it does not cause ill effects, it causes a warning (true positive) when running i3status under Valgrind. Initialize the variable to make code well-defined.
2014-10-07Created three individual Strings for each battery status (charging, ↵Cyril Andreatta1-4/+5
dicharching, full) Replaced hard coded status strings (CHR, BAT, FULL) in print_battery_info.c with user defined strings. The new strings are 'status_chr', 'status_bat' and 'status_full' and can be set in i3status.conf. e.g. status_chr = "⚡ CHR" If any of the new status strings is omitted the standard strings (CHR, BAT, FULL) are used.
2014-08-25Fix battery indicator on systems without POWER_SUPPLY_VOLTAGE_NOW.Klemen Košir1-2/+5
In my case, the voltage variable would stay initialized as -1, which caused the calculation of battery charge percentage to be incorrect (I would get the message that there is no battery present or even -0% charge). I have no idea how this would affect other systems, since I don't have a chance to test this.
2014-05-31Use the absolute values for (dis)charging ratesMichael Stapelberg1-3/+3
Apparently some notebooks report a negative current, whereas most don’t. fixes #1249
2014-04-30Implement battery functionality for NetBSD usersAlexander Vasarab1-0/+266
This patch takes a similar approach as the NetBSD CPU temperature code in that it uses proplib(3) to walk dictionaries supplied by envsys(4). In addition to providing the basic functionality, it: * Provides all existing format specifiers (%emptytime %consumption %status %percentage %remaining) * Respects all existing config options (hide_seconds, low_threshold, integer_battery_capacity, last_full_capacity) * Projects "time until full" when battery status is CS_CHARGING
2014-03-12Unify use of string comparisonsMats1-12/+12
* strncmp(s1, s2, strlen(s2)) → BEGINS_WITH(s1, s2) * strncmp(s1, s2, strlen(s1)) → strcmp(s1, s2) * Prefer case-insensitive comparison for options
2014-03-12For the %percentage display of batteries, drop the leading '0' for values < 10.Jasper Lievisse Adriaanse1-1/+2
2014-02-08Add hide_seconds optionIakov Davydov1-5/+13
fixes: #1134
2013-05-04fix #1017: i3status uses generic battery instanceJonas Cleve1-3/+3
2013-03-19Enable colored output for battery on FreeBSDBaptiste Daroussin1-0/+9
2013-03-09Added format_down option for battery if no battery is available.Christoph Göttschkes1-7/+7
2013-02-23battery: initialize colorful_output to falseMichael Stapelberg1-1/+1
2013-02-14Added option to show battery capacity without decimalsJulien Lequertier1-2/+6
2012-11-15DragonFlyBSD support addedScott Tincman1-2/+2
2012-10-16bugfix: colorize output even without discharge rate (thanks f8l)Simon Elsbrock1-3/+16
On some systems, the discharge rate may be missing, although the battery is still working. This leads to an edge case on Linux systems in which the output may not be colorized although a threshold was defined. This commit fixes the behavior by colorizing output if threshold_type is set to "percentage". Since we cannot calculate remaining time without discharge rate, output is still uncolorized in case of threshold_type set to "time".
2012-10-10Various fixes for the OpenBSD section of the battery backend.Jasper Lievisse Adriaanse1-8/+23
- fix the battery status printing in %status. - fix remaining time when we're charging. - use colors to indicate battery status. - small cleanups.
2012-09-05print_battery.c: do END_COLOR only if START_COLOR was usedSimon Elsbrock1-1/+5
2012-08-31Eat unnecessary space from the battery format str.Piotr Domagalski1-0/+14
If the battery is not discharging it may be not possible to give information on remaining time or consumption. The resulting strings (%remaining, %consumption, %emptytime) are empty then. But because they are in the format string, the output string contains unnecessary spaces in this case. This commit makes i3status strip these spaces.
2012-08-28add additional battery threshold type "percentage"Simon Elsbrock1-5/+12
The battery threshold can now be configured as type "time" or "percentage", but defaults to "time" to prevent unexpected behavior. Also, low_threshold was set to a more reasonable default of 30.
2012-08-13use correct units for battery calculationPhilipp Schaefer1-8/+23
2012-07-12Bugfix: Properly skip "consumption", not "consumptionbuf" (Thanks mloskot)Michael Stapelberg1-1/+1
Fixes #752
2012-07-11small style fix in src/print_battery_info.c (move comment)Michael Stapelberg1-1/+2
2012-07-11Calculate the consumption if POWER_SUPPLY_POWER_NOW does not exist in ueventMarcel Hellwig1-2/+9
2012-07-09Added consumption to battery infoMarcel Hellwig1-0/+8
2012-07-09Added condition, for red color, when battery-time is low, namely battery is ↵Marcel Hellwig1-1/+1
discharging
2012-06-11Moved translation of wireless status code to text from multiple places into ↵Mateusz Loskot1-10/+6
single BATT_STATUS_NAME macro. It simplifies customisation of the hard-wired status text.
2012-05-25colorize battery output if remaining time below thresholdSimon Elsbrock1-1/+6
2012-05-15battery info: output errors in JSON in every caseMichael Stapelberg1-4/+6
This hopefully fixes http://bugs.i3wm.org/707
2012-04-30Implement displaying battery status on OpenBSD.Jasper Lievisse Adriaanse1-0/+58
2012-04-08add yajl compat codeMichael Stapelberg1-0/+1
2012-03-25Properly output JSON with libyajlMichael Stapelberg1-11/+11
2012-02-16Implement the i3bar JSON protocolMichael Stapelberg1-0/+6
This hardcodes all the JSON parts. Strings are not properly escaped currently. The best/easiest way to fix this is by actually using libyajl.
2011-11-26battery: implement "path" option for batteries with non-standard pathsMichael Stapelberg1-2/+2
2010-11-03battery: use POWER_NOW if CURRENT_NOW is not availableMichael Stapelberg1-0/+2
CURRENT_NOW was deprecated for some battery types in recent linux kernels (2.6.36)
2009-12-20Remove trailing whitespaceMichael Stapelberg1-1/+1
2009-12-20Implemented showing the time when battery is emptyAndré-Patrick Bubel1-4/+20
2009-10-16battery: split up %remaining into %percentage and %remaining (Thanks shatter)Michael Stapelberg1-9/+13
2009-10-16Actually use the format string for the battery (Thanks shatter)Michael Stapelberg1-14/+33
2009-10-16Implement option to use the last full capacity instead of the design capacityMichael Stapelberg1-5/+3
2009-10-11Breaks configfiles! Major refactoring of i3status, see belowMichael Stapelberg1-0/+149
We finally switched to libconfuse for a configuration file format which does not require much work for the programmer nor for the user. Plus, it avoids the Not-Invented-Here syndrome of yet another config file format. Furthermore, as a consequence of providing format strings for every "module" (ipv6, wireless, …), we directly print the output and thus we needed to drop support for wmii. This allowed us to get rid of quite some complexity. Documentation about the new configuration file and options will follow. This commit is the beginning of what will be i3status v2.0.