diff options
Diffstat (limited to 'firmware/src/system_config/pic32mx695f512h/system_config.h')
| -rw-r--r-- | firmware/src/system_config/pic32mx695f512h/system_config.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/firmware/src/system_config/pic32mx695f512h/system_config.h b/firmware/src/system_config/pic32mx695f512h/system_config.h new file mode 100644 index 0000000..0183686 --- /dev/null +++ b/firmware/src/system_config/pic32mx695f512h/system_config.h @@ -0,0 +1,238 @@ +/*******************************************************************************
+ MPLAB Harmony System Configuration Header
+
+ File Name:
+ system_config.h
+
+ Summary:
+ Build-time configuration header for the system defined by this MPLAB Harmony
+ project.
+
+ Description:
+ An MPLAB Project may have multiple configurations. This file defines the
+ build-time options for a single configuration.
+
+ Remarks:
+ This configuration header must not define any prototypes or data
+ definitions (or include any files that do). It only provides macro
+ definitions for build-time configuration options that are not instantiated
+ until used by another MPLAB Harmony module or application.
+
+ Created with MPLAB Harmony Version 1.06
+*******************************************************************************/
+
+// DOM-IGNORE-BEGIN
+/*******************************************************************************
+Copyright (c) 2013-2015 released Microchip Technology Inc. All rights reserved.
+
+Microchip licenses to you the right to use, modify, copy and distribute
+Software only when embedded on a Microchip microcontroller or digital signal
+controller that is integrated into your product or third party product
+(pursuant to the sublicense terms in the accompanying license agreement).
+
+You should refer to the license agreement accompanying this Software for
+additional information regarding your rights and obligations.
+
+SOFTWARE AND DOCUMENTATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND,
+EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
+MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
+IN NO EVENT SHALL MICROCHIP OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER
+CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR
+OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
+INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR
+CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF
+SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
+(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
+*******************************************************************************/
+// DOM-IGNORE-END
+
+#ifndef _SYSTEM_CONFIG_H
+#define _SYSTEM_CONFIG_H
+
+/* This is a temporary workaround for an issue with the peripheral library "Exists"
+ functions that causes superfluous warnings. It "nulls" out the definition of
+ The PLIB function attribute that causes the warning. Once that issue has been
+ resolved, this definition should be removed. */
+#define _PLIB_UNSUPPORTED
+
+
+// *****************************************************************************
+// *****************************************************************************
+// Section: Included Files
+// *****************************************************************************
+// *****************************************************************************
+/* This section Includes other configuration headers necessary to completely
+ define this configuration.
+*/
+
+
+// *****************************************************************************
+// *****************************************************************************
+// Section: System Service Configuration
+// *****************************************************************************
+// *****************************************************************************
+
+// *****************************************************************************
+/* Common System Service Configuration Options
+*/
+#define SYS_VERSION_STR "1.06"
+#define SYS_VERSION 10600
+
+// *****************************************************************************
+/* Clock System Service Configuration Options
+*/
+#define SYS_CLK_FREQ 80000000ul
+#define SYS_CLK_BUS_PERIPHERAL_1 80000000ul
+#define SYS_CLK_UPLL_BEFORE_DIV2_FREQ 48000000ul
+#define SYS_CLK_CONFIG_PRIMARY_XTAL 8000000ul
+#define SYS_CLK_CONFIG_SECONDARY_XTAL 0ul
+
+/*** Interrupt System Service Configuration ***/
+#define SYS_INT true
+
+/*** Ports System Service Configuration ***/
+#define SYS_PORT_AD1PCFG ~0xffff
+#define SYS_PORT_CNPUE 0x0
+#define SYS_PORT_CNEN 0x0
+
+#define SYS_PORT_B_TRIS 0x3c20
+#define SYS_PORT_B_LAT 0x0
+#define SYS_PORT_B_ODC 0x0
+
+#define SYS_PORT_E_TRIS 0x0
+#define SYS_PORT_E_LAT 0x0
+#define SYS_PORT_E_ODC 0x0
+/*** Timer System Service Configuration ***/
+#define SYS_TMR_POWER_STATE SYS_MODULE_POWER_RUN_FULL
+#define SYS_TMR_DRIVER_INDEX DRV_TMR_INDEX_0
+#define SYS_TMR_MAX_CLIENT_OBJECTS 5
+#define SYS_TMR_FREQUENCY 1000
+#define SYS_TMR_FREQUENCY_TOLERANCE 10
+#define SYS_TMR_UNIT_RESOLUTION 10000
+#define SYS_TMR_CLIENT_TOLERANCE 10
+#define SYS_TMR_INTERRUPT_NOTIFICATION false
+
+
+// *****************************************************************************
+// *****************************************************************************
+// Section: Driver Configuration
+// *****************************************************************************
+// *****************************************************************************
+
+/*** Timer Driver Configuration ***/
+#define DRV_TMR_INSTANCES_NUMBER 1
+#define DRV_TMR_CLIENTS_NUMBER 1
+#define DRV_TMR_INTERRUPT_MODE true
+
+/*** Timer Driver 0 Configuration ***/
+#define DRV_TMR_PERIPHERAL_ID_IDX0 TMR_ID_1
+#define DRV_TMR_INTERRUPT_SOURCE_IDX0 INT_SOURCE_TIMER_1
+#define DRV_TMR_INTERRUPT_VECTOR_IDX0 INT_VECTOR_T1
+#define DRV_TMR_ISR_VECTOR_IDX0 _TIMER_1_VECTOR
+#define DRV_TMR_INTERRUPT_PRIORITY_IDX0 INT_PRIORITY_LEVEL1
+#define DRV_TMR_INTERRUPT_SUB_PRIORITY_IDX0 INT_SUBPRIORITY_LEVEL0
+#define DRV_TMR_CLOCK_SOURCE_IDX0 DRV_TMR_CLKSOURCE_INTERNAL
+#define DRV_TMR_PRESCALE_IDX0 TMR_PRESCALE_VALUE_256
+#define DRV_TMR_OPERATION_MODE_IDX0 DRV_TMR_OPERATION_MODE_16_BIT
+#define DRV_TMR_ASYNC_WRITE_ENABLE_IDX0 false
+#define DRV_TMR_POWER_STATE_IDX0 SYS_MODULE_POWER_RUN_FULL
+
+
+
+// *****************************************************************************
+// *****************************************************************************
+// Section: Middleware & Other Library Configuration
+// *****************************************************************************
+// *****************************************************************************
+
+/*** USB Driver Configuration ***/
+
+
+/* Disable Device Support */
+#define DRV_USBFS_DEVICE_SUPPORT false
+
+/* Enables Device Support */
+#define DRV_USBFS_HOST_SUPPORT true
+
+/* Maximum USB driver instances */
+#define DRV_USBFS_INSTANCES_NUMBER 1
+
+
+/* Interrupt mode enabled */
+#define DRV_USBFS_INTERRUPT_MODE true
+
+
+/* Number of Endpoints used */
+#define DRV_USBFS_ENDPOINTS_NUMBER 1
+
+
+
+
+
+
+#define DRV_USBFS_HOST_NAK_LIMIT 2000
+/* Provides Host pipes number */
+#define DRV_USBFS_HOST_PIPES_NUMBER 10
+#define DRV_USBFS_HOST_ATTACH_DEBOUNCE_DURATION 500
+#define DRV_USBFS_HOST_RESET_DURATION 100
+// *****************************************************************************
+// *****************************************************************************
+// Section: USB Device Layer Configuration
+// *****************************************************************************
+// *****************************************************************************
+/* Provides Host pipes number */
+#define USB_HOST_PIPES_NUMBER 10
+/* NAK Limit for Control transfer data stage and Status Stage */
+#define DRV_USB_HOST_NAK_LIMIT 200
+
+// *****************************************************************************
+// *****************************************************************************
+// Section: USB Host Layer Configuration
+// *****************************************************************************
+// **************************************************************************
+
+/* Total number of devices to be supported */
+#define USB_HOST_DEVICES_NUMBER 1
+
+/* Target peripheral list entries */
+#define USB_HOST_TPL_ENTRIES 1
+
+/* Maximum number of configurations supported per device */
+#define USB_HOST_DEVICE_INTERFACES_NUMBER 5
+
+#define USB_HOST_CONTROLLERS_NUMBER 1
+
+#define USB_HOST_TRANSFERS_NUMBER 10
+
+/* Number of Host Layer Clients */
+#define USB_HOST_CLIENTS_NUMBER 1
+
+
+/* Number of HID Client driver instances in the application */
+#define USB_HOST_HID_INSTANCES_NUMBER 1
+
+/* Maximum number of INTERRUPT IN endpoints supported per HID interface */
+#define USB_HOST_HID_INTERRUPT_IN_ENDPOINTS_NUMBER 1
+
+/* Number of total usage driver instances registered with HID client driver */
+#define USB_HOST_HID_USAGE_DRIVER_SUPPORT_NUMBER 1
+
+/* Maximum number PUSH items that can be saved in the Global item queue per field
+ * per HID interface */
+#define USB_HID_GLOBAL_PUSH_POP_STACK_SIZE 1
+
+
+
+
+
+
+
+
+
+
+
+#endif // _SYSTEM_CONFIG_H
+/*******************************************************************************
+ End of File
+*/
+
|